Mother & Kids Safety Baby Monitors Digital Wireless Voice BABY Monitors

 

We are professional baby care store , we could suply all the baby products with best price ,should you have any demands or question ,please kindly let us know , we will try our best to service for you  

 

 

Mother and amp; Kids Safety Baby Monitors Digital Wireless Voice BABY Monitors  

 

 

 

1: Antenna
2: Power / Code: Power / code-switch
Press On / Off
Long press on the code, two-color light flashes green Power Off
3: Vibe vibration setting buttons to set the sensitivity of the vibration alarm
4: A / B channel switch, you can switch the transmitter two different channels
5: Charge charge indicator, charging lights, or did not take full battery light does not shine
6: DC6V DC power input
7: The color indicator light, normal operation / indication of the code
Green: long bright, normal line; flashing the code status code after a good green light is off, the red light, then short press the transmit power / on the code key to success of the code, the green light will become long.
Red: not connected normally;
8,9,10,11: 4 volume and alarm indication
8,9 two when wet alarm lights flashing, receive every 4s issue a “beep .. beep .. beep” alarm sound
Temperature alarm 8,9,10 three lights flashing, receive every 4s issue a “beep .. beep .. beep” alarm sound
12: Vibe ON / OFF vibration function on / off, open and close the vibration alarm
13: Two-color LEDs, low battery indication.
Green: The battery voltage is normal
Red: The battery voltage is low or no battery installed
14: VOL-: volume down
15: VOL +: Volume up
16: Speaker
17: battery door, then built 3 AA batteries(battery is not included )
 
Charging current: MAX 80MA
Battery Specifications: Section 3 1.2V AA NiMH rechargeable batteries
Operating temperature: 0 ° C-50 ° C
Precautions
1: When unused for long periods, unplug the battery, or unplug the external power supply
2: Do not external power supply and battery at the same time with an ordinary AA batteries, to avoid danger
3: Charging the battery can only use 1.2V AA NiMH batteries, when not long, do not have an external power supply charge, in order to avoid reduction in battery life
4: Do not use in high temperature, high magnetic field environment
Product acessories
1: a transmitter
2: a receiving host
3: a receiver AC adapter (6V / 500mA DC)
4: a transmitter AC adapter (6V / 500mA DC)
5. A description